BERLIA HDPE (PE) Pipes for Anchoring (Grout Pipes and Sleeve Pipes)
Highlight: High Pressure Grout and Flexible Sleeve Pipes are widely used for anchoring applications in foundation, especially in the presence of quick sand and clay.
Grout Pipes
Our pipes are known for their thickness and are useful in water supply, overhead tanks, etc. For the fabrication of our Grout Pipes, we make use of high quality & laboratory tested raw materials and hi-tech machines. These pipes are mostly customized as per the requirement of the project.
HDPE pipes used as sleeve pipes and grout pipes are common in:
- Rock anchoring
- Soil nailing
- Ground anchors
- Micro piles
- Post-tensioning
- Tunnelling
- Bridge foundations
- Geotechnical works
1. BERLIA HDPE Sleeve Pipes
HDPE sleeve pipes protect:
- Anchor tendons
- Rebars
- Cables
- PT strands
Protect From:
- Corrosion
- Soil contact
- Moisture
- Chemical attack
2. BERLIA HDPE Grout Pipe
- Anchor grouting
- Consolidation grouting
- Pressure grouting
- Cement grout injection
Recommended Pipe Type
PE80 or PE100 HDPE
Higher pressure grouting → thicker wall pipe
Grouting Pressure Considerations
| Application | Typical Pressure |
|---|---|
| Low pressure grouting | 2–5 bar |
| Anchor grouting | 5–15 bar |
| High pressure injection | 15–30+ bar |
Typical Applications of BERLIA Grout Pipes
- Soil nailing
- Ground anchors
- Tunnel support
- Slope stabilization
- Dam strengthening
- Foundation underpinning
- Bridge anchoring systems